Forum Discussion
fulltimin
Oct 04, 2020Nomad
Here's a pic of a test I did on some of the 1/4" thick plywood that I have. I wanted to see how well it would bend by adding some kerf cuts in the plywood.
I used my portable circular saw and cut about 1/2 way through the thickness of the plywood, and about 1/2" apart.
I didn't measure these, it was just a rough estimate.

I used my portable circular saw and cut about 1/2 way through the thickness of the plywood, and about 1/2" apart.
I didn't measure these, it was just a rough estimate.

About Motorhome Group
38,769 PostsLatest Activity: Dec 31, 2014