Forum Discussion
fulltimin
Dec 14, 2020Nomad
Next was to pull the plywood out again, and cut a slot in said plywood. The plywood is 1/2" thick.
I routed out a section about 4" long and about 1.5" wide. This was also cut 5/16" deep. That left enough "beef" in there to satisfy me, and still allow room for the fingers to grab ahold to move the plywood.

I routed out a section about 4" long and about 1.5" wide. This was also cut 5/16" deep. That left enough "beef" in there to satisfy me, and still allow room for the fingers to grab ahold to move the plywood.

About Motorhome Group
38,769 PostsLatest Activity: Mar 31, 2026