Forum Discussion
fulltimin
May 16, 2021Nomad
After building the first set of drawers and cabinet frame, I wanted to add on the rest of the setup from the left.
In the meantime, I needed to purchase another piece of 3/4" plywood, and that's when the trouble started.

Right there is why. Different thicknesses. My plan was to leave about 1/16" between the plywood and the 2x above it, and then add a shim to make up the difference.
Oops.
In the meantime, I needed to purchase another piece of 3/4" plywood, and that's when the trouble started.

Right there is why. Different thicknesses. My plan was to leave about 1/16" between the plywood and the 2x above it, and then add a shim to make up the difference.
Oops.
About Motorhome Group
38,768 PostsLatest Activity: Jan 26, 2021