Forum Discussion
fulltimin
Jun 15, 2021Nomad
After cutting the walnut to width, without moving the fence, I did the following.

I wanted a piece of walnut that ended up about 1/32" thick. The thickness of my saw blade is about 1/8", so adding those 2 together, we end up with about 5/32".
I inserted a piece of 5/32" thick walnut, between the plywood block and the fence.

I wanted a piece of walnut that ended up about 1/32" thick. The thickness of my saw blade is about 1/8", so adding those 2 together, we end up with about 5/32".
I inserted a piece of 5/32" thick walnut, between the plywood block and the fence.
About Motorhome Group
38,768 PostsLatest Activity: Nov 21, 2015