Forum Discussion
fulltimin
Jun 15, 2021Nomad
I then removed the walnut between the plywood and the fence.

Making sure the plywood would not move, I then moved the fence up against the plywood block.

I removed the plywood block, and then ran the piece of walnut through the saw again.
That gave me the thickness that I wanted for the drawers.

Making sure the plywood would not move, I then moved the fence up against the plywood block.

I removed the plywood block, and then ran the piece of walnut through the saw again.
That gave me the thickness that I wanted for the drawers.
About Motorhome Group
38,768 PostsLatest Activity: Nov 21, 2015