Forum Discussion
fulltimin
Sep 18, 2022Nomad
Switching gears just a touch for tonight.
When I wanted to cut some plywood to finish framing around the pilot and copilot windows, I needed to make a pattern.
First step was to mark some plywood to get started. I used a couple of plastic spring clamps to hold this piece in place.

Next was to go outside and and mark with a pencil the curve I needed so I would know where to cut.

When I wanted to cut some plywood to finish framing around the pilot and copilot windows, I needed to make a pattern.
First step was to mark some plywood to get started. I used a couple of plastic spring clamps to hold this piece in place.

Next was to go outside and and mark with a pencil the curve I needed so I would know where to cut.

About Motorhome Group
38,767 PostsLatest Activity: Sep 19, 2016