Forum Discussion
8,453 Replies
- navegatorExplorerCuriosity got the best of me, what goes under the last drawer?
I will guess the cabin heater?
navegator - WELL, I am surprised! I was waiting for a comment on this particular drawer, which did not happen. Lol.

Now that you see the large drawer front, and the 1/2 height drawer, ... this is just to make the bottom drawer look like the other 2 bottom drawers, so it looks like a large bottom drawer.
Anyway, there you have the explanation. - Got my 4 drawers assembled and glued together today. Wahoo!

- Finally got all my drawer parts cut and machined and are ready to be assembled.

All my grooves and dado's are cut, just waiting for glue, clamps, and plywood. Wahoo! - Anyone remember this?

Yes, that's the "ear" that I rebuilt on our Magic Bullet blender, after it had broken off.
If you remember, I first tried gluing the original back on, and that only held up for about a week or two.
Then I created a completely new "ear" from the UV light glue.
It is still holding up just fine. It's been about a month or so. It's still looking good at this point.
I'll wait a little while and see how it goes, that is assuming I remember to post about it. Lol. - Hey there! Sorry for causing a couple of days of "withdrawal" symptoms for a few of you.
Anyhow, I had a little time to continue working on the next set of drawers.
I cut the grooves for the drawer bottoms, and then started cutting the grooves for the slides in some of the sides. I have 1/2 of those cut, so I can finish the other 2 sets tomorrow.
Forecast is for rain, so I'll not be able to work on other stuff outside, so I should be able to get some work done inside the coach.
Wahoo!
- Another computer emergency today for a customer. Took care of my day for working on the MOHO.
UGH! - Got my next set of drawer sides, fronts, and backs cut to size.
I need to cu the grooves, dado's, etc before assembling them.
BigRabbitMan wrote:
Those look like the ones I have under the cupboards in my house to light up the counters. They work very well.
As of now, those are the ones that I am planning on using. They provide a lot of light, and look like they should be versatile.
We'll see how they look as the build progresses.- BigRabbitManExplorer
fulltimin wrote:
I wanted to check out a set of strip led's, to light up the counters for cooking and preparing food, etc.
Here's what I found on Amazon.
These have a string of 42 lights end to end, but they are a double set, so they have a total of 84 per strip.
Those look like the ones I have under the cupboards in my house to light up the counters. They work very well.
Here is a larger picture, and every set of 3, (6 lights total), the strip can be cut. Included are a bunch of extra ends that can be soldered to the cut strip if needed.
Both ends come with a connection, so they can be plugged together if you want more than a single string in length.
About Motorhome Group
38,768 PostsLatest Activity: Jan 26, 2021