Cab over wood repair water damage rott
I need to replace the wood (front, bottom) of sleeper cabin above the chassis cab. How is the floor connected to the chassis? - to the cabin roof (sheet metal) - to the 'bulk head' of the motor...
Forum Discussion
My floor and front wall structure is what appears 1.5x1 with 1" Styrofoam.
Can't find 1.5 or 1 inch thick would. Only way I can think of: use 2x6 or 2x8 (about 1.5" thick) and rip 1" wide sections?
Other suggestions?
Haven't looked for 1" material. But if available in 1", I would like to use the stiffer/denser 'microfoam' (no sure what the name is) that has a hard top and bottom; mine was blue and alu (nice to cut; used it for insulation in my basement).
Can't find 1.5 or 1 inch thick would. Only way I can think of: use 2x6 or 2x8 (about 1.5" thick) and rip 1" wide sections?
Other suggestions?
Haven't looked for 1" material. But if available in 1", I would like to use the stiffer/denser 'microfoam' (no sure what the name is) that has a hard top and bottom; mine was blue and alu (nice to cut; used it for insulation in my basement).
