Changing Tire Size
Has anyone switched from a factory tire size of 275/80R22.5 to 295/75R22.5. Tire sizes almost identical only about 3/4" wider. My only concern is the dually spacing of the rear wheels. Thoughts? Th...
Forum Discussion
2putt,
I'd seriously surprised if there were any interference problems with that little of size change in tires. With such a small amount of increase in any of the dimensions, I'd bet my house you're gonna no issues at all. A while ago, as in this time last year, I was in need or new tires. I had the junk Michelin 255 80R 22.5 XRV tires and they were cracked and shot. So, I wasn't about to make the same mistake the previous owner did and, I started shopping around and looking at what else I could use.
Well, long story short, I came up with some 265 75 22.5 Yokohama RY-103 tires and, like your comparisons, the size difference in any and all dimensions, was minute. I've had them on for almost a year now and, couldn't be happier. Not one single bit of clearance interference anywhere, at any time.
Scott
I'd seriously surprised if there were any interference problems with that little of size change in tires. With such a small amount of increase in any of the dimensions, I'd bet my house you're gonna no issues at all. A while ago, as in this time last year, I was in need or new tires. I had the junk Michelin 255 80R 22.5 XRV tires and they were cracked and shot. So, I wasn't about to make the same mistake the previous owner did and, I started shopping around and looking at what else I could use.
Well, long story short, I came up with some 265 75 22.5 Yokohama RY-103 tires and, like your comparisons, the size difference in any and all dimensions, was minute. I've had them on for almost a year now and, couldn't be happier. Not one single bit of clearance interference anywhere, at any time.
Scott
