Checking water in motor and generator
I'm trying to check the water in the reservoirs of my motor and my generator. The fiberglass containers are so thick I can't see through them and I can't see the water level with a 18 watt DeWalt flas...
Forum Discussion
"becker".....On my Monaco, I made a dip stick out of a 3/8" wooden dowel that I stored in the engine compartment. I measured the exterior of the tank, since the Low and High were marked on the outside and marked the stick. When I needed to check I removed the reservoir cap and used the dipstick.
On the generator, you should be able to see the fluid when you remove the cap.
On the generator, you should be able to see the fluid when you remove the cap.
