Forum Discussion
CharlesinGA
Sep 23, 2017Explorer
The Roadmaster application catalog shows a 1½ diameter rear anti-sway bar for the Workhorse 3500 cutaway,
3500 Cutaway Van & Cutaway 07-17, p/n 1109-175, Rear sway bar 1 1/2 diameter. Note 68, requires drilling = Yes. weight = 50 lbs, install time = 1.5 hr.
Note 68 says, Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
See page 23 of THIS catalog for front and rear bars, endlinks, etc.
HERE is the install instructions for the rear anti-sway bar.
Charles
3500 Cutaway Van & Cutaway 07-17, p/n 1109-175, Rear sway bar 1 1/2 diameter. Note 68, requires drilling = Yes. weight = 50 lbs, install time = 1.5 hr.
Note 68 says, Chassis built before June of 2007 will require an additional axle mounting bracket kit part # 590061-00.
See page 23 of THIS catalog for front and rear bars, endlinks, etc.
HERE is the install instructions for the rear anti-sway bar.
Charles
About Motorhome Group
38,710 PostsLatest Activity: Mar 12, 2025