Coachmen Leprechaun slide motor came out
2019 C and the gear drive that deploys the driver side slide has managed to get outside the body. This is the bottom gearbox. There is a shaft coming down from the top gearbox and it is still inside...
Forum Discussion
Very good news – I found these 2 videos that provide a lot of information on your slide problem. Watch the first video which is about motor repair but gives much insight into the second one which details how the H frame, gearbox/shaft/motor and vertical wall piece all tie together. The gearbox is held in place by the verticle wall frame ie The black vertical piece on the left of your picture that is rivited to the wall. The not so good news. I’m convinced that you will need to replace all of these componets which come from Lipper as a kit. Lipper purchased Schwintek. Perhaps the other slide side will also need to be replaced.
Suggest you contact the video tech, send him your picture and ask how go get your slide in plus offer to pay him if not go to WA for his repair shop. At the very least get his recommendation for a good tech near you.
https://www.youtube.com/watch?v=cxEYSstvICI
https://www.youtube.com/watch?v=lQPIrVaSOlk
Suggest you contact the video tech, send him your picture and ask how go get your slide in plus offer to pay him if not go to WA for his repair shop. At the very least get his recommendation for a good tech near you.
https://www.youtube.com/watch?v=cxEYSstvICI
https://www.youtube.com/watch?v=lQPIrVaSOlk
