Electric steps

Control unit $117.16
Door magnet for new style control box $22.63

I have done this upgrade to older Kwikee steps and it works.
You may need to change the wiring connector for the motor.


Richard

You can get a complete step assembly at Colaw for less then that!
Control unit is also available there. I have one in my garage! What is the numbers on your controller? PM me!

OUCH. I just put a rocker switch by the door.

Since you have a 2001. The step controller is no longer available. This link points you to the ONLY and best solution for getting your step back to OEM. Doug

https://store.lci1.com/kwikee-step-motor-conversion-kit-for-triple-and-quad-steps-kwik-step-motor-kit.html

I would not condem the controller without doing some testing. Quite often there could be ground issue or the magnetic door switch.
Control box should be available from Colaw RV salvage. Colaw
What color is the controller?

The previous owner cut the wire from control box and run wire straight from motor to battery with alligator clips. It could be that control box give up and he bypass. I got some work to do with that.

Thank you for the wiring diagram. I will check it out.

The 16 gauge purple wire is not normally used. It is used on some for optional(extra)step lights.

Just so you know.. On my Steps there is a wire that is cut... Still not sure what it is for. the reason it's cut is it has no use... It appears to be an "Extra wire" near as I can tell.

Bless those former owners who cut wires off, for they know not what they do.