Exhaust Manifold
I am in the process of replacing my exhaust manifold and have a few broken studs in the Head.I tried welding a nut on the stud and using an easy out, all failed. I was able to drill them through an...
Forum Discussion
I work on old tractors a lot. A trick a guy taught me was to first weld a flat washer to the broken bolt, then weld a bolt on. It works well.
The other thing I do with exhaust manifold bolts is try all the bolts and loosen the ones that come quite easily. Then get the engine as warm as possible before trying the hard ones. Sometimes a little heat before loosening, saves a lot of aggravation after.
The other thing I do with exhaust manifold bolts is try all the bolts and loosen the ones that come quite easily. Then get the engine as warm as possible before trying the hard ones. Sometimes a little heat before loosening, saves a lot of aggravation after.
