Foggy Window Repair
I’m going to a DIY repair on a couple of my windows. Trying to decide on using putty tape or foam. I had one window out a few years ago and used putty tape. Also any tips on this type of repair
Forum Discussion
mike brez wrote:
Yes thanks I’m going with all crl products. I don’t believe my windows are etched just foggy. My windows are very hard to slide and was thinking of going with a 3/16 spacer.
That will make them narrow if they have 1/4 now and will not work. You will get a lot of outside air coming around your windows. You have to measure them to get the correct product. The felt might need to be replaced if bad. Glass thickness us usually 1/8 thick.
The easy way to measure is open a window and if you have a raw edge, meaning no latching molding, then cut out the mastic and then you can measure the glass and the space between the glass.
