Head lite removal
I have a 2012 four winds hurricane class a motor home. The passenger side head lite has water in it. Does anyone know how to remove the head lite to fix problem
Forum Discussion
You can take a very small drill bit slightly larger than toothpick drill as low as you can and let the water drip out. Clean the hole with a toothpick until the water is gone. You can then use canned air, or an air compressor on a low setting to dry the interior. Most newer Riggs use headlight assemblies from a major manufacturer and make the cap to fit the light. If you can find who they used they are easy to find and cheap on ebay or Amazon. Im not familiar with your rigg but it's usually straight forward. Pull the power to the light it's usually clip type fitting with a release tab. Should be 4 to six screws or bolts holding the lamp assembly in place. It may come out the front or back.
Hope this helps.
Jw
Hope this helps.
Jw
