help with external dish and R6 cable routing
Good Morning all, I am in a location where I am forced to use an external dish to get a signal. I want to connect to the park cable connection but the black box of many buttons doesn't have a place f...
Forum Discussion
I've done it like this: Sat dish to outside "park cable" jack. On "black box", move cable from "cable in", plug that into sat box input. On sat box, connect cable from "Sat out" to black box "cable in". Push "cable" buttons on black box, tune TVs to channel 3 (or 4 depending on sat box) and all should work. This is how I did it and it worked. Cable from dish into driver's side window and into sat box input works too.
