help!
i have spent the last two days replacing a new motor on a single step electric kwickee step, the motor works fine using a battery in both directions but when it is wired to the existing wiring it will...
Forum Discussion
look at page 37 to test
Page 37 has the procedure for testing the steps this will tell you if you have a bad switch or if it is the controller.
4 way connector pin out is further down.
hope this helps.
Page 37 has the procedure for testing the steps this will tell you if you have a bad switch or if it is the controller.
4 way connector pin out is further down.
hope this helps.
