Is 360 hp enough for for 38-40 ft class A
Looking at going to a DP from a 5th wheel. A lot of units have 360-380 hp. Is that enough? Especially if pulling a toad or a trailer. thanks pointrow
Forum Discussion
A dyno doesn't measure hp. It only measures torque. Hp is derived from that number. Torque X rpm ÷ 5252 = hp.
Example
800 tq X 2500 rpm ÷ 5252 = 380 hp
Example
800 tq X 2500 rpm ÷ 5252 = 380 hp
