Forum Discussion
rag-ftw
Aug 09, 2012Explorer
Lobstah wrote:
Ready Brake here. Very little work required on the car, it's a steel cable that runs from a lever on their receiver, through the front of the car, around the engine compartment, through the firewall, and clamps to the brake pedal. As your MH slows down, the car pushes forward on the receiver, which in turn pulls the cable and the brake pedal. Very little to break, and very simple system.
Jim
Just completed a 5,000 mile trip from TX to AK with a Ready Brake system. It worked great! I did find that I had to allow a little more slack in the cable than the installation instructions indicate to allow for the frost heaves.
bob g
About Motorhome Group
38,707 PostsLatest Activity: Jan 05, 2014