My Jamboree Build
For a long time I have wanted to buy a small Class C motorhome that I could use throughout Colorado for riding events as well as outings with my 2 kids. As time went by, I decided to buy a used veh...
Forum Discussion
The weather was great in Denver today so I finished the installation of the CMOS-310 Camera on the back of the Jamboree.
I did have to extend the cable from the camera to the connector as it was just too short. I spliced in a 3 foot long USB cable (lots of soldering & heatshrink).
I mounted it high enough so that I'd have a clear view when backing up or towing. The camera's location is right in the middle of the back wall. The spare tire is right below it and the only issue with it is that it does block the view of the trailer hitch.
See it up there?
Here's a closeup-
.
I did have to extend the cable from the camera to the connector as it was just too short. I spliced in a 3 foot long USB cable (lots of soldering & heatshrink).
I mounted it high enough so that I'd have a clear view when backing up or towing. The camera's location is right in the middle of the back wall. The spare tire is right below it and the only issue with it is that it does block the view of the trailer hitch.
See it up there?
Here's a closeup-
.
