Forum Discussion
dougrainer
Apr 03, 2016Nomad
1. ANY codes?
2. IF not working on 120, there should be codes
3. The new cooling unit came with 2 new 120 elements, so they should be good
4. GAS pressure and clean burner and orifice will cause cooling problems. Also verify the LP baffle is installed.
5. Since you were stationary for 2 months, does that mean it ran 24/7 on 120 volts for those 2 months and you never had a chance to see performance on LP?
6. Odds are you just need a competent Technician to check the parameters I have listed above.
7. Is this unit in a slide room?
8. It is also possible the upper rear area, the air ventilation baffles have shifted and are causing a rear air flow problem. Doug
2. IF not working on 120, there should be codes
3. The new cooling unit came with 2 new 120 elements, so they should be good
4. GAS pressure and clean burner and orifice will cause cooling problems. Also verify the LP baffle is installed.
5. Since you were stationary for 2 months, does that mean it ran 24/7 on 120 volts for those 2 months and you never had a chance to see performance on LP?
6. Odds are you just need a competent Technician to check the parameters I have listed above.
7. Is this unit in a slide room?
8. It is also possible the upper rear area, the air ventilation baffles have shifted and are causing a rear air flow problem. Doug
About Motorhome Group
38,707 PostsLatest Activity: Jan 05, 2014