Onan 5500 Producing 2.0 volts. Pics inside
Ok so here is the issue and here is what I have done. Diagnosis: 2.0 VAC output measured both at transfer switch and then at breakers on genset itself. Attempted Remedy: *Followed Troublesho...
Forum Discussion
As above you actually "full field" the rotor by applying the 12 volts through it. 65 volts would be correct for one phase of the two phase unit.
The regulators job is to control/vary this rotor voltage to keep the output constant.
The regulators job is to control/vary this rotor voltage to keep the output constant.
