Outside light...problem...
On our 2017 Winnebago, the outside light beside the entrance door is not working. I suspect the bulb needs replacing but I can't see any way to remove the light in order to get to the bulb. Any thoughts? Thanks!
Forum Discussion
4 Replies
goufgators wrote:
The bulb was burned out.dougrainer wrote:
If the light is the new style LED, then you have to replace the complete light assbly. I would remove the light assbly and check for ground and 12 volts positive on the 2 wires. Doug
Thanks to both responders. I'll check out your recommendations.
It was (is) the type where you squeeze the plastic cover and it pops off.dougrainer wrote:
If the light is the new style LED, then you have to replace the complete light assbly. I would remove the light assbly and check for ground and 12 volts positive on the 2 wires. Doug
Thanks to both responders. I'll check out your recommendations.- If the light is the new style LED, then you have to replace the complete light assbly. I would remove the light assbly and check for ground and 12 volts positive on the 2 wires. Doug
- Don't know exactly what type of light you have, but almost all of the outside lights are designed the same way. The lense is attached by a little plastic tip. Pinch the lense and it should pop right now.
Here's some images, look at the plastic lenses, you'll see the little tip that catches in a slot or hole in the assembly.
Click here.
