Charging Batteries With Generator
I posted this once and I think there was a snafu with the site! I had some answers but can get them. I have a Pheaton with a Magnum Energy system, I programmed the generator to start when the volts a...
Forum Discussion
50% discharge (-300ah) wouldn't take 300 hours. 6 hours if you could keep it at 50 amps. More like 8 considering you wont be in bulk mode on the last 20%.
Key is to make your charging be "bulk" charging.
You don't want to be below 50% SOC and you will be in acceptance charge above about 80% SOC. So with a 100A charger and a 600ah battery bank two hours should get you from 50% to 80%.
80 to 100% can take a while and is not a very efficient use of diesel or genny time.
Les
Key is to make your charging be "bulk" charging.
You don't want to be below 50% SOC and you will be in acceptance charge above about 80% SOC. So with a 100A charger and a 600ah battery bank two hours should get you from 50% to 80%.
80 to 100% can take a while and is not a very efficient use of diesel or genny time.
Les
