Forum Discussion
- gsf35099ExplorerMy DIY tv install looks almost exactly the same as Ivy's. Great install.
- Bruce_BrownModeratorOn my parents old Allegro (a 2005) the TV was only held in by a piece of plywood wedged in up top - apparently friction was supposed to hold it in. It didn't, as it literally fell out on one trip to Lancaster, Pa.
Yours may be the same. - IvylogExplorer IIIHere is my DIY install.LED TVs are so thin you can mount on the face of the cabinet, not inside.
- Teacher_s_PetExplorerOn the Tiffin Owner's website many answers to questions like this can be found with a simple search. On our 2006 Phaeton the TV trim frame is attached with about 4" long #2 square head screws through the face frame of the adjoining cabinets, 3 per side. Once those are removed the face frame had perpendicular inner members that could be slowly be worked out side to side using a flat pry bar.
About Motorhome Group
38,705 PostsLatest Activity: Jan 23, 2025