Retuning diesel motor for more torque and hp
I have a 2013 Serrano FRED with the Max Force 7 engine on a Workhors WD22 Chasis. Overall I’ve been very happy with this setup except when it comes to climbing. Even on small grades the max speed drop...
Forum Discussion
discovery4us wrote:
Are you looking at a aftermarket tuner or flashing the stock computer? Big difference between the two.
Many computers are set differently for different motors based on what each individual manufacturer wants at that time. Example, my DP has a 5.9 cummins at 275hp and 660ft.lbs. but the same motor was offered in the following years with 300 and then 325 hp. and around 890 ft. lbs. torque. Cummins service for a fee will reflash my computer to give me the 325 hp. and 890 ft. lbs. but I haven't convinced myself it is worth the fee. Loss of mpg and a little more stress on components, not sure it outways going up the hills faster.
How do you know you will loose fuel milage, Our coach gained mileage over all, and horse power at the top end.
Our programmer runs about 9=12 pounds of boost, and about 1000-1200 EGT. that is on level ground at 60-65 mph.
