Sewer compartment on 2002 Itasca Suncruiser
Anyone who owns this or older Winnebago/Itasca might know what I'm writing about, and probably the only ones who could offer suggestions. The hole in the floor of the sewer compartment is too small...
Forum Discussion
I have a 1998 Itasca and when I first went to use it I found that the hole was too far to the right to clear the bayonet fitting. I removed the ring that the compartment lid screws into, cut the hole on the left side about 1/4" larger (still able to be covered by the ring) and remounted the ring. It's tight but works.
Dave
Dave
