Tips on removing decals?
After 7 years of mostly outside storage, the decals on my Itasca 30B are peeling at the edges - and they are stained and sun bleached. Plus I want to remove them because the (extra cost) VETROLITE ...
Forum Discussion
You need a heat gun. Hold it about 8~10" away and pull the sticker at a sharp angle back on itself. If you just pull the sticker off at a 90 degree angle to the surface it may leave behind residue. Using the heat gun you will be able to pull off large area's at a time. You'll know your getting the sticker too hot if it starts to stretch and tear.
It's goes fairly fast once you figure out exactly how close the heat gun it should be. I removed all the graphics on the front of my TT in 30 minutes.
It's goes fairly fast once you figure out exactly how close the heat gun it should be. I removed all the graphics on the front of my TT in 30 minutes.
