Total Rebuild of a 1979 Dodge Class C
I would say some of you have seen the start of this build that my brother bgriffey had posted, Well I have now bought the RV from him and plan to post the pixs of the build I have found a lot of rot i...
Forum Discussion
Too much time on my hands, it's cold and damp light snow today. I decided to experiment with the PVC. This is what I was thinking.
Looks like I could have trimmed the butyl rubber around my trim.
http://i1142.photobucket.com/albums/n615/DLC012954/Corners%20motor%20home/100_3334.jpg
Don't know if it will work for you, I pasted the part of my picture of PVC to the upper rear of your motor home
http://i1142.photobucket.com/albums/n615/DLC012954/Corners%20motor%20home/Picture130787.jpg?t=1330969902
One other option would be Electrical conduit, I don't know how large or expensive it can be but I do know heat from a Heat gun or Propane torch will bend the conduit. That would aid in the contours of the motor home. One more thing can you tell me what size to enter in the pop-up so I don't explode the page.
Looks like I could have trimmed the butyl rubber around my trim.
http://i1142.photobucket.com/albums/n615/DLC012954/Corners%20motor%20home/100_3334.jpg
Don't know if it will work for you, I pasted the part of my picture of PVC to the upper rear of your motor home
http://i1142.photobucket.com/albums/n615/DLC012954/Corners%20motor%20home/Picture130787.jpg?t=1330969902
One other option would be Electrical conduit, I don't know how large or expensive it can be but I do know heat from a Heat gun or Propane torch will bend the conduit. That would aid in the contours of the motor home. One more thing can you tell me what size to enter in the pop-up so I don't explode the page.
