Trimark latch with twin keyholes: lubrication
The handle was really hard to open after unlocking. Getting more so with time. I took it off the door to have a good look. Three torx 14 screws from inside the MH and two more at the latch. Lubricat...
Forum Discussion
For sure, no grease or oil should go into the keyhole except in a last resort where you will be disassembling and washing the sticky stuff out with alcohol.
I didn't grease the lock - just plastic levers and a wee bit into the bolts.
I didn't grease the lock - just plastic levers and a wee bit into the bolts.
