I have been buying parts for my 1996 Georgie Boy Cruise Master 3124W using the P30 chassis selection.Yesterday I was told that my RV has a Workhorse chassis, not a P 30, and that is why a new A/C condenser would cost around $1700.00, and the one I can get from the parts store for the P 30 chassis for $150.00 would not work. How can I determine whether I have a P30 or a Workhorse chassis? Is that what the W in the model number stands for? I'm at a loss.

as I recall, workhouse for the first few years just rebranded the old p30/32. I would guess/bet that a 96 is on an old p30. I would "assume" that somebody here can identify if you give the entire chassis number. bumpy

Workhorse DID NOT make the W series chassis in 1996 so what you have is a P-30 chassis. Why not get the part number off of your OLD AC condenser and just purchase the replacement condenser and not get too hung up about what chassis it is on. Any AC/radiator shop should be able to fabricate a new condenser for you.I believe around that time most of the AC components came from a company called Evans-Tempcon. You might try this link for some help: Evans-Tempcon

Bumpyroad wrote:as I recall, workhouse for the first few years just rebranded the old p30/32. I would guess/bet that a 96 is on an old p30. I would "assume" that somebody here can identify if you give the entire chassis number. bumpyDo you mean the VIN #?

rgatijnet1 wrote:Workhorse DID NOT make the W series chassis in 1996 so what you have is a P-30 chassis. Why not get the part number off of your OLD AC condenser and just purchase the replacement condenser and not get too hung up about what chassis it is on. Any AC/radiator shop should be able to fabricate a new condenser for you.I believe around that time most of the AC components came from a company called Evans-Tempcon. You might try this link for some help: Evans-TempconThank you for the response and the link. I always thought it was a P30 but this guy insisted that a condenser for the P30 would not work on my chassis. He also wanted 7-10,000 dollars to replace my leveling jack system.

From the Workhorse Manual:First three characters of a Chevrolet Motor Home Chassis VIN are 1GB.The first three characters of a Workhorse Custom Chassis VIN are 5B4.I suspect your 1996 was built by Chevrolet, but the VIN is definitive.

Workhorse or P-30 Chassis | Good Sam Community

Bumpyroad
Explorer
May 19, 2018
as I recall, workhouse for the first few years just rebranded the old p30/32. I would guess/bet that a 96 is on an old p30. I would "assume" that somebody here can identify if you give the entire chassis number.
bumpy
rgatijnet1
Explorer III
May 19, 2018
Workhorse DID NOT make the W series chassis in 1996 so what you have is a P-30 chassis. Why not get the part number off of your OLD AC condenser and just purchase the replacement condenser and not get too hung up about what chassis it is on. Any AC/radiator shop should be able to fabricate a new condenser for you.
I believe around that time most of the AC components came from a company called Evans-Tempcon. You might try this link for some help: Evans-Tempcon
Bobchambe
Explorer
May 19, 2018
Bumpyroad wrote:
as I recall, workhouse for the first few years just rebranded the old p30/32. I would guess/bet that a 96 is on an old p30. I would "assume" that somebody here can identify if you give the entire chassis number.
bumpy

Do you mean the VIN #?
Bobchambe
Explorer
May 19, 2018
rgatijnet1 wrote:
Workhorse DID NOT make the W series chassis in 1996 so what you have is a P-30 chassis. Why not get the part number off of your OLD AC condenser and just purchase the replacement condenser and not get too hung up about what chassis it is on. Any AC/radiator shop should be able to fabricate a new condenser for you.
I believe around that time most of the AC components came from a company called Evans-Tempcon. You might try this link for some help: Evans-Tempcon

Thank you for the response and the link. I always thought it was a P30 but this guy insisted that a condenser for the P30 would not work on my chassis. He also wanted 7-10,000 dollars to replace my leveling jack system.
wolfe10
Explorer
May 19, 2018
From the Workhorse Manual:

First three characters of a Chevrolet Motor Home Chassis VIN are 1GB.

The first three characters of a Workhorse Custom Chassis VIN are 5B4.

I suspect your 1996 was built by Chevrolet, but the VIN is definitive.
Gjac
Explorer III
May 19, 2018
The vin tells you for sure, you probably have a 1995 chassis also so when you order parts use 1995 not 1996. That can be confusing when ordering parts because major changes happened from 95 to 96. 1995 was OBD1 1996 was OBD2. You won't be able to read codes from a parts store on a 1995 chassis, for parts replacement.
pulsar
Explorer
May 19, 2018
Workhorse didn't exist in 1996.

Tom
ets1996
Explorer
May 19, 2018
As Gjac stated yours is most likely a 1995 chassis again verified by your vin. My 1996 Rexhall is titled as 1996 although it was built on a 1995 chassis. I remember a guy had a 1997 titled but verified chassis was a 1994 having to do with builders advanced purchase and use of chassis.
Stim
Explorer
May 20, 2018
I have owned numerous motorhomes and always found that running the generator and roof air was more efficient than using dash air.
Less drag on the engine and less heating of the engine and the roof air cooled much better.
You might want to re-think repairing it. ???
Bobchambe
Explorer
May 20, 2018
Thank you everyone!

My VIN starts with 1GB so it verifies my thoughts that it is a P30.

As far as the A/C. I will probably try replacing the condenser and recharging the A/C.

I prefer the engine A/C to putting hours on the generator and running the roof A/C's. Last year when the temperatures in the 90's, the coach A/C's ran constantly trying to make the inside of the coach bearable.

Thanks Again....Bob

Forum Discussion

Workhorse or P-30 Chassis

About Motorhome Group

Related Content

chevy p-30 brakes

P-30 front end parts

Brakes dragging on a P-30 chassis

Chevy P-30 w/454 owners?

P-30 Brake Squeal