xantrex freedom 458 inverter problems
Has anyone had the problem of the hot wire coming into the inverter getting hot and melting the wire nut connecting it to the inverter? I've had this happen twice and when it does of course you lose a...
Forum Discussion
I thought the wire nut might be one of the problems. But, that's what they put on it when it was installed at the factory. The xantrex itself has no. 10 wire in it. I think no. 10 romex is usually orange and if that's the case that's what's going into it on both of our units. I think also one of the problems might be that the wire in the inverter is stranded and the romex of course is solid. Not good for a wire nut either.
