12VDC access. For new TV
This is in regards to my 2008 Keystone Sprinter 26BHS For this season, I'm upgrading our ancient TV. I also decided that I wanted to change to an AC/DC TV, to allow for using the TV when off grid ...
Forum Discussion
Gdetrailer wrote:jmckelvy wrote:
Usually close to the TV mount there will be a panel with the F type connector(s), a 12 volt socket and the switch for the TV antenna amp.
Are you saying you don't have one or that it is not close to the TV?
OP mentioned that the CURRENT TV is on a wall mounted swivel AND IS 120V ONLY.
Not all preinstalled TVs will have a 120 and 12V outlet and I suspect if the OP has a 12V outlet behind the TV or near the TV they would not have posted their question in the first place.
As usual, everyone on this forum is GOOD and FAST too - great answers - thanks!
There is an amp for the antenna that is withing the console, I'll have to look at that. As was also pointed out, the stereo is 12VDC powered, so the power must be in the somewhere - while I was feeling around in the panel, i did feel an inline fuse, so it must be somewhere close.
The TV is already on the way, and is AC/DC. I had considered installing an inverter, but the power waste during inversion is significant AFAIK, so I decided to try a 12V TV
