Autoscan mystery
I have 3 factory installed Samsung TV's in my 2011 coach. I am using the campground cable TV connection. I use the autoscan feature on each TV to set up the channels. Here's the problem: I don't get t...
Forum Discussion
autoscans are based on signal strength at the time the scan is done. some tnings thst can have a negative impact on signal strength are..
- poor or old coax. best is to use a quality (not usually found at a megastore) RG-6 cable
- bad connectors
- using push-on adapters
- a flaky signal from the campground which could be attributed to any of the above
if the site ne t to you is vacant and you have enough cable try connecting to that site and see if the problem continues.
- poor or old coax. best is to use a quality (not usually found at a megastore) RG-6 cable
- bad connectors
- using push-on adapters
- a flaky signal from the campground which could be attributed to any of the above
if the site ne t to you is vacant and you have enough cable try connecting to that site and see if the problem continues.
