Dish TV Connections

You absolutely can connect a VIP 211Z to multiple TVs. The 211Z has two outputs. First is the HDMI output which is high def. It also has a composite (Red/White for audio and yellow for video) which is standard definition. The way I have done this is to place the receiver near the most important (living room?) TV and connect with HDMI. Then get an RF Modulator that converts the red/white/yellow connection to coax. Once this signal is converted to coax it can be distributed to the other TVs via the camper's coax wiring, if available. Another method, which I have not tried, would be to utilize a wireless HDMI transmitter/receiver. There are units that have one transmitter (connected to the HDMI output on the receiver) and multiple receivers which can be attached to the TVs. Again, I have not tried this method. The transmitter/receivers can be expensive. Please note that in the methods above, all TV's must watch the same satellite channel. HOWEVER, I also connect the OTA antenna to the main TV coax input so this TV can watch OTA while others can watch sat signal. Sorry for the lengthy post.