Dish tv
I have a winegard T14 and switched from Direct TV to Dish. I changed the switches on the reciever but i still don't have a full signal. I have two new boxes and i only get about half the channels i'...
Forum Discussion
Unless you go through the Check Switch routine described in the manual and get a successful SW64 switch you will not be able to get all of the channels. Follow the instructions exactly. If you are using more than 1 receiver you must be sure each receiver is connected, one at a time, to the Main output of the satellite and the Check Switch routine is run.
I also assume you are referring to the T4, not 14.
I also assume you are referring to the T4, not 14.
