Rewiring works.
Having mechanical skills, I can't test electronic board, but I can figure out parallel vs row routing.
So I cut the circuit board to separate LED on 2 separate halves.
Here is first test, what light up 48 LED and confirm I am on right track.
Click For Full-Size Image.
Than I found new use for the lights. In my camper main light, I put LED panels into old fluorescent fixtures. Even with 8 of small panels - DW complain about darkness.
So having "there is not such thing like too much light" in mind- I went extra way to connect the 12 LED that were cut off in the center.
Here is how the final wiring and front effect come up.
I wire it with no voltage regulator, so I'll see if 14V I might have in the camper will create an issue.
Click For Full-Size Image.
Click For Full-Size Image.
Thanks CA Traveler for the idea and for all contributions.
