I have always downloaded my 6CSx to my laptop doing exactly what you described above. I was doing the same for the 600T AFTER I SAVEd and then CLEARed the Track.
I got suspicious this morning about the SAVEd and CLEAR that I have been doing so I recorded today's ATV ride; SAVEd it; but didnot CLEAR it. Then I used MapSource and BINGO it downloaded to my computer the way I was expecting it to download.
Now I know what my problem was: CLEARing before downloading. I now have new questions.
1) How do I pull up yesterday's SAVEd (in the 600T) file and download it to my computer?
2) How do I take one of my Saved to Computer 60CSx files and upload it to the 600T?
By the way, I was simultaneously running both the 60CSx and the 600T today. Both downloads are identical and the Track Properties of the 600T agrees with the ACTIVE Track Properties of the 60CSx. I will also stay with MapSource rather than BaseCamp since it will work for both GPS'.
Thank You Very Much for Your Help. I was not getting anywhere using the Owner's Manual. I will, however, go back and re-read it see if it makes sense.
LeRoy
