LED TV providing RF interference?
I have a set of Sennheiser remote headphones that I use so I can hear the TV better. My TV in the sticks & bricks is an older LCD type and the headphones work just great. It uses the composite type ...
Forum Discussion
By utilizing a RCA-headphone jack I was able to connect the headphones directly into the headphone output on the TV and the headphones work fine. Therefore the issue must be with the converter or the digital output format of the TV. Frankly that's a little above my pay grade, but I'm going to give it a shot. I know, or at least believe, the digital output is enabled. When the optical cable is plugged into the digital output port I can see a red beam in the opposite end of the cable. I've searched several times and can't find a toggle on the audio menu that allows to enable/disable the digital output. I'll also look to see if there's a method of selecting a particular digital audio output. Thanks for the replies.
