Mobley problems
My Mobley has been acting strangely for about a month. I have to redo the connection to it on average about once per hour of use. But it varies a lot. I don't think that I have had the update, becau...
Forum Discussion
Dutch_12078 wrote:BoonHauler wrote:BluStem wrote:BoonHauler wrote:
..... would you have any idea of what the stay alive voltage is?
The Power Save page of the Mobley says 'The mobile hotspot will power off automatically if the voltage of the OBD connector drops to 11.5v'.
Respectfully, that's the wrong answer.
I want to keep the Mobley operating past the two hour limit. At 12.8 VDC the device still shuts down after two hours.
I'm not using my Mobley SIM in the Mobley currently, so I haven't had a chance to play around with my variable power supply to see what the minimum voltage is for a "keep awake". I do know of someone that worked around the problem by plugging his Mobley 120VAC adapter into a digital lamp timer that shuts it off for one minute every two hours.
Dutch:
I'm starting to wonder if the 1.0.3 Firmware brings along with it the new AT&T Connected Car account requirements? I read somewhere the new program needs to have the Mobley 'mobile' if a dare say meaning it physically needs to be moved around like it would be in a vehicle.
During the day my solar system charging keeps the voltage above 14VDC. The unit doesn't shutoff at 2 hours but the internet access does so I have to cycle the unit to get internet access again ..... smh
