No TV - SensarPro could have died?
Have the usual batwing antenna. Couple of years ago I installed a Winegard SensarPro signal finder and it has worked fine until yesterday when the TV suddenly stopped working on all channels. The be...
Forum Discussion
Anything is possible, but I would look for a loose connection from the SensarPro to the TVs. Attachment to the SensarPro is via short Coax cables which may have vibrated loose where they are connected to the circuit board. If you saved the old power board when you installed the SensarPro, try putting it back in and see if anything works. If it soes, you have your answer.
