Ok...whats left to check on my dish.......
Couple months ago while camping in Ga...wind blew over my dish a couple of times...the last time it happened, I couldn't get a signal...removed the LNB and tapped it on a rock...reassembled and poof.....
Forum Discussion
Bent Dish = no signals:( . Try taking the dish and laying face down on a level surface and checking it 360 deg. around the dish to make sure it is completely level. If you visually see any bent areas, gently push on the dish face until you don't see any unlevel areas.
If you are unable to level dish, just go to a dish store and buy a used one.
If you are unable to level dish, just go to a dish store and buy a used one.
