Forum Discussion

rmasonschneider's avatar
rmasonschneider
Explorer
Dec 30, 2014

out went 12" CRT TV and in came 24" LED but help.

I just purchased a 24” LED tv to replace the old 12 inch CRT which came with the unit from the factory. It was my understanding that the original CRT drew about 30w which is pretty close to the 33w d...
2oldman's avatar
2oldman
Explorer II
Dec 30, 2014
magicbus wrote:
I would throw a meter on the wires and confirm it really is 12 volts before plugging anything anywhere.
^^ Do this, then...

If it measures 12v, (likely) then put a small psw inverter on there and plug the TV brick into the inverter.

12v into a set requiring 19v is not a good idea.

About RV Must Haves

Have a product you cannot live without? Share it with the community!8,793 PostsLatest Activity: Aug 22, 2023