Pathway X2 cold weather issues?
When the temperature gets down to freezing or below (much too often this year it seems) our Pathway X2 often loses all satellite connection. Going through the set-up process brings it back without is...
Forum Discussion
TucsonJim wrote:
Every few days, I have to refresh the set up. I don't know what causes it. But here in AZ, we rarely get near freezing, so that is not what's causing mine.
How are you hooked up ?
I was having problems like that at first when I tried hooking up to the 'sat in' connection on my 5th wheel. These golf ball antennas need a direct connection to the receiver box inside your RV otherwise they won't work. There cannot be any switches, splitters, etc in the line.
As an experiment, I would suggest that you run your cable line from the antenna dish through a window or try and sneak it thru a slide and then connect up directly to the receiver box. Try that for a couple weeks and see if you still have problems. If not, then the solution would be to run a new dedicated line from the 'sat in' connection on your RV all the way to the receiver box. This is a common situation with all these portables.
I would also suggest to the OP that he try this too. I cannot think of a reason that this would solve a cold weather problem, but connecting up this way would eliminate a bunch of variables that have to do with interior coach connections which may or may not be affected by cold weather.
Of course you can ignore this reply if you are already connected in this manner.
Last idea for both of you. All these portable antenna dishes get their electricity to operate through the cable connection with the receiver box (12 volts I think). Is it possible that you momentarily lose your 110v supply to the inside receiver box for any reason during cold weather, causing the system to think it's been unplugged ? If yes, then that would explain why you need to go through the reset procedure. Remember that you still have juice flowing to the antenna dish even when the receiver box is 'off' (but not unplugged from a wall socket). But if you lose 110v to the receiver box, then it's just like you're starting up from scratch the next time you turn on the box. Maybe the house circuit 'blinks' when an electrical heater on the same circuit energizes ?
I know I'm grasping at straws here. But I would look for something that changes during cold weather operation - and operation of an electrical heater might be one.
Good luck - I'd be real interested in hearing what you find are the actual problems.
Tim
