pics and questions on tv /satellite hookup
Ok, I have this tv outlet to work with. I am trying to hook up Satellite. The outlet states on the front tv1 and satellite. There is no coax running to the satellite connection...
Forum Discussion
You should see that imprinted in the plastic is also TV 2, Cable, Ant. The satellite line is just a pass-through barrel connection. You need to connect the coax from your OTA TV antenna to the Ant input connection, your outside Cable coax connection to the Cable input connection and the coax output from TV1 should go to a splitter has coax cables running to each TV. This will provide the 12V power to the OTA TV when you push the button on the front and you will be able to view that OTA TV signal on all TV's. When you turn off that button you will be able to view campground cable. It WILL NOT let you view satellite TV on all TV's as the only satellite connection setup in that wall plate is the pass through that will allow the satellite antenna signal to input to a satellite TV receiver located near that wall plate.
