Poor Digital TV Signal
I found myself surrounded by trees and unable to get a fix on the satellite. So I raise the antenna, turn on the booster (green light) and run the tv auto setup to search for local stations. Got 1 and...
Forum Discussion
RJsfishin wrote:
I received the sensor pro today, and what could have been a quick changeout, wasn't. Both are made to fit into a standard electrical box, But most if not all were just recessed into the panel by doing a square 1 1/2" cutout.
The new sensor pro is bigger on the back side, and near impossible to make the cutout big enuff and still leave enuff material for the screws. So I had to modify a standard household electrical box to mount it in, then mount the box over the existing holes. Not hard to do, and doesn't look bad, just a little time consuming is all.
The Sensar Pro used to come in 2 pieces. You just cut the rectangle the size shown in the template and secure the backer plate to the wall. The Sensar Pro then screws to the back plate. Is that backer plate not there?
