Purchase and install Winegard SK SWM3
I think I'm finally about to pull the trigger and order the Winegars Traveler SWM 3 to replace my, about to be defunct, Kingdome. These questions ar for anyone who had done this job. How good ar...
Forum Discussion
I never considered not using the oblong plate for mounting. The Kingdome, thus the Winegard will be very close to my audio/video distribution center. That part is easy, but space limitations may be a problem when I try to find placement for the dish controller, the PI and splitter. I need to find a way to locate the dish controller in a different location and move the power inserter and splitter into my very crowded audio/video distribution center.
I am hoping I can use existing Kingdome power and coax cables to pull the new controller and coax cables from the SWM3. I'm uncertain as to how the Kingdome control wires are now run. The control center for the Kingdome is separated from the A/V center.
My neighbor in the storage lot with has a Phaeton like mine had his installed in Quartzite. I need to see what he may know about how they pulled the controller wires. This could be a real sticky problem for a novice.
I am hoping I can use existing Kingdome power and coax cables to pull the new controller and coax cables from the SWM3. I'm uncertain as to how the Kingdome control wires are now run. The control center for the Kingdome is separated from the A/V center.
My neighbor in the storage lot with has a Phaeton like mine had his installed in Quartzite. I need to see what he may know about how they pulled the controller wires. This could be a real sticky problem for a novice.
