Question about slimline 3
I have a D12-700 receiver hooked up to a slimline 3 with PI, before this I had it setup with a 3-lnb legacy setup with mutiswitch. With this first setup I had local's, now I do not. Also I noticed whe...
Forum Discussion
Bill.Winegard wrote:
Some area of the Country are not able to receive locals with a SL3. If you happen to be in one of those markets your locals are broadcast on 119 and you will need to replace your SWM3 with a SWM5.
There is only one correct setting for the SWM3 and as you have noted, the receiver will set it automatically.
The signal meter should be showing SWM plus 101, 99 and 103. You will see 99(s) and 99(c) plus 103 (ca and cb) plus 103(s). The (s) are spot beamed channels.
You should have only one cable connected to the receiver, you should not have any B-Band converters installed and you should have a PI21 (21V) power inserter installed.
Bill i can only see the swm and 101, also i have the b-band in because that is the way the it is on my house with swm5. to note though, I tried without the b-band, and all wokrd the same as with.
Thanks for the help
