Question about slimline 3
I have a D12-700 receiver hooked up to a slimline 3 with PI, before this I had it setup with a 3-lnb legacy setup with mutiswitch. With this first setup I had local's, now I do not. Also I noticed whe...
Forum Discussion
Bill.Winegard wrote:
A multiswitch may or may not be a SWM switch. If you order a SWM3 then it will be SWM but there is also a non-SWM3 LNB.
Is there some easy way to tell one from another? I ordered the proper voltage inserter in case it is the SWM model. I have an HR22 DVR; from what you posted previously it sounds as if the receiver will be able to determine if the LNB is the SWM version. Should I connect it without the voltage inserter and let it figure out what it is connected to? My understanding is that it has enough output to power the LNB (at least for a while) without the need for the inserter.
Joel
